Fabricare echipamente profesionale de protectie

Permanent Systems for Flat and Inclined Roofs


SecuRope® Horizontal

EN 795:2012 tip C  &  CEN/TS16415:2013
Horizontal anchor system

The SecuRope® Horizontal anchor system is designed for permanent installation on platforms, walls and different types of roofs and can simultaneously protect up to 4 users against falling. The anchor line is represented by a stainless steel cable supported by the terminal and intermediate anchor points. The system has a wide range of brackets and mounting plates in order to fit perfectly the geometry of the substructure (eg: a roof) and to provide waterproofing where needed.

Certification: EN 795:2012 tip C  &  CEN/TS16415:2013

Users: 1-4 persons
Cable: Ø8mm, AISI 316 Stainless steel
Terminal and intermediate anchors: AISI 316 Stainless steel
Expected service life: 20 years
Inspections: at least once a year / immediately after the system has been involved in an incident
Passing intermediate anchors: automatically
Accesories for various configurations:
- in-line energy absorber (with compresion spring)
- plates for changing the path of the line (45°, 90°)
Dedicated accesories for roofs:
- concrete roof
- PVC covered roof
- bitumen covered roof
- sheet metal covered roof

Note: These fall arrest systems are designed and configured to suit the needs for protection and to respect the spatial limitations existing at a particular workplace (the actual place of installation). Thus, prior to installation, it is necessary to do an on-site risk assessment and to carry out measurements.

____________________________________________________________________________________

SecuRope® Inclined

EN 795:2012 tip C  &  CEN/TS16415:2013
Inclined anchor system

The SecuRope® Inclined anchor system is designed for permanent installation on platforms, walls or different types of roofs and can simultaneously protect up to 4 users against falling. The anchor line is represented by a stainless steel cable supported by the terminal and intermediate anchor points. The system has a wide range of brackets and mounting plates in order to fit perfectly the geometry of the substructure (eg: a roof) and to provide waterproofing where needed.

Certification: EN 795:2012 tip C  &  CEN/TS16415:2013

Users: 1-4 persons
Cable: Ø8mm, AISI 316 stainless steel
Terminal and intermediate anchors: AISI 316 stainless steel
Expected service life: 20 years
Inspections: at least once a year / immediately after the system has been involved in an incident
Passing intermediate anchors: automatically
Accesories for various configurations:
- in-line energy absorber (with compresion spring)
- plates for changing the path of the line (45°, 90°)
Dedicated accesories for roofs:
- concrete roof
- PVC covered roof
- bitumen covered roof
- sheet metal covered roof

Note: These fall arrest systems are designed and configured to suit the needs for protection and to respect the spatial limitations existing at a particular workplace (the actual place of installation). Thus, prior to installation, it is necessary to do an on-site risk assessment and to carry out measurements.